规格 | 价格 | |
---|---|---|
100mg | ||
250mg | ||
500mg | ||
Other Sizes |
体外研究 (In Vitro) |
PHA 568487 减少氧化应激和 NF-κb p65 磷酸化,同时增加抗氧化基因的表达。甲基乌头碱 (MLA) 的作用则相反[2]。 PHA 提高 NADPH 氧化酶和抗氧化基因的表达,这与巨噬细胞和小胶质细胞中 NF-kB p65 磷酸化的减少有关[3]。
|
---|---|
体内研究 (In Vivo) |
PHA 568487 可减少缺血性中风和胫骨骨折中风小鼠的行为功能障碍和神经元损伤[2]。当腹膜内给药(1.25 mg/kg;每日治疗)时,PHA 568487 显着减少缺血大鼠的脑梗塞体积并改善神经系统结果[4]。
|
动物实验 |
Animal/Disease Models: C57BL/6J male mice (10-12 weeks old)[2]
Doses: PHA 568487 (PHA; 0.4 and 0.8 mg/kg); Methyllycaconitine (MLA; 4 and 6 mg/kg) Route of Administration: Injected intraperitoneally (ip) once on day 1, or twice on days 1 and 2, after pMCAO Experimental Results: Injection of PHA (0.8 mg/kg) and MLA (6 mg/kg) on days 1 and 2 after pMCAO yielded the best effect on infarct volume and behavior tests. Animal/Disease Models: Adult male SD (Sprague-Dawley) rats (297 6±8.3 g)[4] Doses: 1.25 mg/kg Route of Administration: Ip;0.1 mL; treated daily Experimental Results: demonstrated a significant reduction of the cerebral infarct volumes and an improvement of the neurologic outcome. |
参考文献 |
[1]. F Barclay Shilliday, et al. Multiple species metabolism of PHA-568487, a selective alpha 7 nicotinic acetylcholine receptor agonist. Drug Metab Lett. 2010 Aug;4(3):162-72.
[2]. Zhenying Han, et al. Alpha-7 nicotinic acetylcholine receptor agonist treatment reduces neuroinflammation, oxidative stress, and brain injury in mice with ischemic stroke and bone fracture. J Neurochem. 2014 Nov;131(4):498-508. [3]. Dingquan Zou, et al.Activation of Alpha-7 Nicotinic Acetylcholine Receptor Reduces Brain Edema in Mice with Ischemic Stroke and Bone Fracture. Mol Neurobiol. 2017 Dec;54(10):8278-8286. [4]. Lorena Colás, et al. In vivo imaging of Α7 nicotinic receptors as a novel method to monitor neuroinflammation after cerebral ischemia. Glia. 2018 Aug;66(8):1611-1624. |
分子式 |
C20H24N2O7
|
---|---|
分子量 |
404.41
|
CAS号 |
527680-57-5
|
相关CAS号 |
PHA 568487 free base;527680-56-4
|
SMILES |
OC(/C=C/C(=O)O)=O.O=C(C1=CC=C2OCCOC2=C1)NC1CN2CCC1CC2
|
存储方式 |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
运输条件 |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
溶解度 (体外) |
DMSO: 250 mg/mL (618.18 mM)
|
---|---|
溶解度 (体内) |
配方 1 中的溶解度: 2.08 mg/mL (5.14 mM) in 10% DMSO + 40% PEG300 + 5% Tween80 + 45% Saline (这些助溶剂从左到右依次添加,逐一添加), 悬浮液;超声助溶。
例如,若需制备1 mL的工作液,可将100 μL 20.8 mg/mL澄清DMSO储备液加入400 μL PEG300中,混匀;然后向上述溶液中加入50 μL Tween-80,混匀;加入450 μL生理盐水定容至1 mL。 *生理盐水的制备:将 0.9 g 氯化钠溶解在 100 mL ddH₂O中,得到澄清溶液。 配方 2 中的溶解度: ≥ 2.08 mg/mL (5.14 mM) (饱和度未知) in 10% DMSO + 90% (20% SBE-β-CD in Saline) (这些助溶剂从左到右依次添加,逐一添加), 澄清溶液。 例如,若需制备1 mL的工作液,可将 100 μL 20.8 mg/mL澄清DMSO储备液加入900 μL 20% SBE-β-CD生理盐水溶液中,混匀。 *20% SBE-β-CD 生理盐水溶液的制备(4°C,1 周):将 2 g SBE-β-CD 溶解于 10 mL 生理盐水中,得到澄清溶液。 View More
配方 3 中的溶解度: ≥ 2.08 mg/mL (5.14 mM) (饱和度未知) in 10% DMSO + 90% Corn Oil (这些助溶剂从左到右依次添加,逐一添加), 澄清溶液。 1、请先配制澄清的储备液(如:用DMSO配置50 或 100 mg/mL母液(储备液)); 2、取适量母液,按从左到右的顺序依次添加助溶剂,澄清后再加入下一助溶剂。以 下列配方为例说明 (注意此配方只用于说明,并不一定代表此产品 的实际溶解配方): 10% DMSO → 40% PEG300 → 5% Tween-80 → 45% ddH2O (或 saline); 假设最终工作液的体积为 1 mL, 浓度为5 mg/mL: 取 100 μL 50 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀/澄清;向上述体系中加入50 μL Tween-80,混合均匀/澄清;然后继续加入450 μL ddH2O (或 saline)定容至 1 mL; 3、溶剂前显示的百分比是指该溶剂在最终溶液/工作液中的体积所占比例; 4、 如产品在配制过程中出现沉淀/析出,可通过加热(≤50℃)或超声的方式助溶; 5、为保证最佳实验结果,工作液请现配现用! 6、如不确定怎么将母液配置成体内动物实验的工作液,请查看说明书或联系我们; 7、 以上所有助溶剂都可在 Invivochem.cn网站购买。 |
制备储备液 | 1 mg | 5 mg | 10 mg | |
1 mM | 2.4727 mL | 12.3637 mL | 24.7274 mL | |
5 mM | 0.4945 mL | 2.4727 mL | 4.9455 mL | |
10 mM | 0.2473 mL | 1.2364 mL | 2.4727 mL |
1、根据实验需要选择合适的溶剂配制储备液 (母液):对于大多数产品,InvivoChem推荐用DMSO配置母液 (比如:5、10、20mM或者10、20、50 mg/mL浓度),个别水溶性高的产品可直接溶于水。产品在DMSO 、水或其他溶剂中的具体溶解度详见上”溶解度 (体外)”部分;
2、如果您找不到您想要的溶解度信息,或者很难将产品溶解在溶液中,请联系我们;
3、建议使用下列计算器进行相关计算(摩尔浓度计算器、稀释计算器、分子量计算器、重组计算器等);
4、母液配好之后,将其分装到常规用量,并储存在-20°C或-80°C,尽量减少反复冻融循环。
计算结果:
工作液浓度: mg/mL;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL)。如该浓度超过该批次药物DMSO溶解度,请首先与我们联系。
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL ddH2O,混匀澄清。
(1) 请确保溶液澄清之后,再加入下一种溶剂 (助溶剂) 。可利用涡旋、超声或水浴加热等方法助溶;
(2) 一定要按顺序加入溶剂 (助溶剂) 。