规格 | 价格 | |
---|---|---|
100mg | ||
250mg | ||
500mg |
体外研究 (In Vitro) |
Bentropine(0.1-10 μM;72 小时)可抑制 MDA-MB-231 细胞增殖,IC50 值约为 5 μM。苯托品以剂量依赖性方式显着降低 MDA-MB-231 细胞和 4T1-luc2 细胞中微球的大小和数量 [1]。通过乙酰胆碱受体、多巴胺转运蛋白/受体和/或组胺受体,苯托品抑制癌症干细胞 (CSC) 的功能 [1]。 Bentropine 通过激活 M1 和 M3 毒蕈碱受体,促进髓鞘再生并引起少突胶质细胞分化 [1]。
|
---|---|
体内研究 (In Vivo) |
在 4T1 小鼠模型中,苯托品(5 μM,4 周)可降低肿瘤发生的可能性 [1]。
|
细胞实验 |
细胞活力测定 [1]
细胞类型: MDA-MB-231 测试浓度: 0、0.1、0.625、1.25、2.5、5、10 μM 孵育时间:72小时 实验结果: MDA-MB-231抑制细胞生长,IC50值约为5.0 μM 。 细胞活力测定[1] 细胞类型: MDA-MB-231 测试浓度: 0, 1, 2, 5 μM 孵化时间: 4-6 天 实验结果:体外以剂量依赖性方式抑制 BCSC 的微球形成和自我更新能力。 |
动物实验 |
Animal/Disease Models: balb/c (Bagg ALBino) mouse carrying 4T1 mammary tumors [1]
Doses: 1.5 mg/kg Route of Administration: injection; 3-week Experimental Results: Tumor size and weight were Dramatically diminished, but body weight remained unchanged. |
参考文献 |
[1]. Jihong Cui, et al. New use of an old drug: inhibition of breast cancer stem cells by benztropine mesylate. Oncotarget. 2017 Jan 3;8(1):1007-1022.
[2]. Santosh S Kulkarni, et al. Comparative structure-activity relationships of benztropine analogues at the dopamine transporter and histamine H(1) receptors. Bioorg Med Chem. 2006 Jun 1;14(11):3625-34. |
分子式 |
C21H25NO
|
---|---|
分子量 |
307.4293
|
CAS号 |
86-13-5
|
相关CAS号 |
Benztropine mesylate;132-17-2
|
SMILES |
CN1[C@H]2CC[C@@H]1C[C@@H](C2)OC(C3=CC=CC=C3)C4=CC=CC=C4
|
存储方式 |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
运输条件 |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
溶解度 (体内) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80: Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 :Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400 请根据您的实验动物和给药方式选择适当的溶解配方/方案: 1、请先配制澄清的储备液(如:用DMSO配置50 或 100 mg/mL母液(储备液)); 2、取适量母液,按从左到右的顺序依次添加助溶剂,澄清后再加入下一助溶剂。以 下列配方为例说明 (注意此配方只用于说明,并不一定代表此产品 的实际溶解配方): 10% DMSO → 40% PEG300 → 5% Tween-80 → 45% ddH2O (或 saline); 假设最终工作液的体积为 1 mL, 浓度为5 mg/mL: 取 100 μL 50 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀/澄清;向上述体系中加入50 μL Tween-80,混合均匀/澄清;然后继续加入450 μL ddH2O (或 saline)定容至 1 mL; 3、溶剂前显示的百分比是指该溶剂在最终溶液/工作液中的体积所占比例; 4、 如产品在配制过程中出现沉淀/析出,可通过加热(≤50℃)或超声的方式助溶; 5、为保证最佳实验结果,工作液请现配现用! 6、如不确定怎么将母液配置成体内动物实验的工作液,请查看说明书或联系我们; 7、 以上所有助溶剂都可在 Invivochem.cn网站购买。 |
---|
制备储备液 | 1 mg | 5 mg | 10 mg | |
1 mM | 3.2528 mL | 16.2639 mL | 32.5277 mL | |
5 mM | 0.6506 mL | 3.2528 mL | 6.5055 mL | |
10 mM | 0.3253 mL | 1.6264 mL | 3.2528 mL |
1、根据实验需要选择合适的溶剂配制储备液 (母液):对于大多数产品,InvivoChem推荐用DMSO配置母液 (比如:5、10、20mM或者10、20、50 mg/mL浓度),个别水溶性高的产品可直接溶于水。产品在DMSO 、水或其他溶剂中的具体溶解度详见上”溶解度 (体外)”部分;
2、如果您找不到您想要的溶解度信息,或者很难将产品溶解在溶液中,请联系我们;
3、建议使用下列计算器进行相关计算(摩尔浓度计算器、稀释计算器、分子量计算器、重组计算器等);
4、母液配好之后,将其分装到常规用量,并储存在-20°C或-80°C,尽量减少反复冻融循环。
计算结果:
工作液浓度: mg/mL;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL)。如该浓度超过该批次药物DMSO溶解度,请首先与我们联系。
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL ddH2O,混匀澄清。
(1) 请确保溶液澄清之后,再加入下一种溶剂 (助溶剂) 。可利用涡旋、超声或水浴加热等方法助溶;
(2) 一定要按顺序加入溶剂 (助溶剂) 。