规格 | 价格 | |
---|---|---|
100mg | ||
250mg | ||
500mg | ||
Other Sizes |
靶点 |
MAO-B 0.4 nM (IC50)
|
---|---|
体外研究 (In Vitro) |
根据其体外结合特性,发现两种放射性标记抑制剂都是其各自酶的选择性高亲和力配体。在大鼠大脑皮层中,3H-Ro 19-6327 的 KD 和 Bmax 值分别为 18.4 nM 和 3.45 pmol/mg 蛋白质 [1]。 Lazabemide 的 IC50 值如下:DA 摄取 > 500 μM,NA 摄取 86 μM,5HT 摄取 123 μM[1]。 ..人 MAO-B 和 MAO-A 被拉扎贝胺 (5 μM) 抑制,IC50 值分别为 6.9 nM 和 >10 nM。此外,在酶测定中,它可抑制大鼠 MAO-B 和 MAO-A,IC50 值分别为 37 nM 和 >10 μM[2]。导致突触体释放内源性单胺。因此,与 L-deprenyl 相比,拉扎贝胺 (500 μM) 会导致更多的 5 HT 释放,但释放 DA 的效率较低。相反,对于 5 HT 和 DA 释放,拉扎贝胺基本上是惰性的[2]。当肾小管上皮细胞用 50 microM L-DOPA 处理时,拉扎贝米 (250 nM) 明显抑制 DOPAC 的产生,但不会增加新形成的 DA 的积累[3]。
|
体内研究 (In Vivo) |
Lazabemide (3 mg/kg) 可减少缺血再灌注引起的羟自由基的产生,与媒介物处理的对照组相比,用该药物预处理可导致较低的 DOPAC 水平[4]。
|
参考文献 |
[1]. Saura J, et al. Quantitative enzyme radioautography with 3H-Ro 41-1049 and 3H-Ro 19-6327 in vitro: localization and abundance of MAO-A and MAO-B in rat CNS, peripheral organs, and human brain. J Neurosci. 1992 May;12(5):1977-99.
[2]. Bondiolotti GP, et al. In vitro effects on monoamine uptake and release by the reversible monoamine oxidase-B inhibitors lazabemide and N-(2-aminoethyl)-p-chlorobenzamide: a comparison with L-deprenyl. Biochem Pharmacol. 1995 Jun 29;50(1):97-102. [3]. Guimaraes J, et al. The activity of MAO A and B in rat renal cells and tubules. Life Sci. 1998;62(8):727-37. [4]. Suzuki T, et al. MAO inhibitors, clorgyline and lazabemide, prevent hydroxyl radical generation caused by brain ischemia/reperfusion in mice. Pharmacology. 1995 Jun;50(6):357-62. |
分子式 |
C8H11CL2N3O
|
---|---|
分子量 |
236.10
|
CAS号 |
103878-83-7
|
相关CAS号 |
Lazabemide;103878-84-8
|
SMILES |
C1=CC(=NC=C1Cl)C(=O)NCCN.Cl
|
溶解度 (体内) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80: Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 :Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400 请根据您的实验动物和给药方式选择适当的溶解配方/方案: 1、请先配制澄清的储备液(如:用DMSO配置50 或 100 mg/mL母液(储备液)); 2、取适量母液,按从左到右的顺序依次添加助溶剂,澄清后再加入下一助溶剂。以 下列配方为例说明 (注意此配方只用于说明,并不一定代表此产品 的实际溶解配方): 10% DMSO → 40% PEG300 → 5% Tween-80 → 45% ddH2O (或 saline); 假设最终工作液的体积为 1 mL, 浓度为5 mg/mL: 取 100 μL 50 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀/澄清;向上述体系中加入50 μL Tween-80,混合均匀/澄清;然后继续加入450 μL ddH2O (或 saline)定容至 1 mL; 3、溶剂前显示的百分比是指该溶剂在最终溶液/工作液中的体积所占比例; 4、 如产品在配制过程中出现沉淀/析出,可通过加热(≤50℃)或超声的方式助溶; 5、为保证最佳实验结果,工作液请现配现用! 6、如不确定怎么将母液配置成体内动物实验的工作液,请查看说明书或联系我们; 7、 以上所有助溶剂都可在 Invivochem.cn网站购买。 |
---|
制备储备液 | 1 mg | 5 mg | 10 mg | |
1 mM | 4.2355 mL | 21.1775 mL | 42.3549 mL | |
5 mM | 0.8471 mL | 4.2355 mL | 8.4710 mL | |
10 mM | 0.4235 mL | 2.1177 mL | 4.2355 mL |
1、根据实验需要选择合适的溶剂配制储备液 (母液):对于大多数产品,InvivoChem推荐用DMSO配置母液 (比如:5、10、20mM或者10、20、50 mg/mL浓度),个别水溶性高的产品可直接溶于水。产品在DMSO 、水或其他溶剂中的具体溶解度详见上”溶解度 (体外)”部分;
2、如果您找不到您想要的溶解度信息,或者很难将产品溶解在溶液中,请联系我们;
3、建议使用下列计算器进行相关计算(摩尔浓度计算器、稀释计算器、分子量计算器、重组计算器等);
4、母液配好之后,将其分装到常规用量,并储存在-20°C或-80°C,尽量减少反复冻融循环。
计算结果:
工作液浓度: mg/mL;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL)。如该浓度超过该批次药物DMSO溶解度,请首先与我们联系。
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL ddH2O,混匀澄清。
(1) 请确保溶液澄清之后,再加入下一种溶剂 (助溶剂) 。可利用涡旋、超声或水浴加热等方法助溶;
(2) 一定要按顺序加入溶剂 (助溶剂) 。